Site content © 2010-2012 Marathon Manufacturing Ltd.
TRUCKBOSS
NEWSLETTER SIGN UP
SUBMIT
USE
NETWORK
JOIN US!
TRUCKBOSS TRUCK DECKS - FAQ
DOWNLOADS
Can I fit a TRUCKBOSS-LONG-8 on a standard box truck?
Yes. Many people prefer this arrangement for carrying long track (155”+) snowmobiles or UTVs. This may affect your trailering ability. An alternative is the deck extension (TBOSS-EXT) which will add 12” length to a TRUCKBOSS and is easily removable when not needed.
Can I install a light underneath my deck?
Yes, there are a set of blunt-cut/sealed leads at the driver’s side rear of your TRUCKBOSS (just inside the tail-gate). These leads are switched with your truck’s running lights. TRUCKBOSS recommends the use of an LED light (for its low amperage properties).
I have plastic bed rail caps—should I remove them?
No. Many truck manufacturers now include plastic bed rail caps on their trucks. Neither OEM nor aftermarket plastic caps will interfere with installation.
I have a plastic box liner—should I remove it?
There is no requirement to remove your plastic box liner, however it will have to be cut in several places in order to securely clamp the TRUCKBOSS interface (RAIL-CAPTURE) to your truck’s bed rails. To ease TRUCKBOSS install remove the plastic liner.
I have a spray-in box liner—will this affect install?
No. It is fine to install TRUCKBOSS over top of a spray-in liner.
What is the load rating of TRUCKBOSS?
2000 lbs evenly distributed. Be aware of your truck’s GVWR.
I have to pick up a fridge, couch or something else large. How do I transport it?
Whatever you can carry in your truck bed you can carry on your truck bed. If TRUCKBOSS will support two full size ATVs it will also support any large items you’d use your truck to haul.
What is the quickest way to temporarily remove TRUCKBOSS from my truck?
There are 4 or 5 brackets holding the TRUCKBOSS deck to each RAIL-CAPTURE (truck/deck interface). The Install Manual refers to these as the LARGE RAIL ANGLE BRACKETS. Remove these brackets and lift the deck off your truck leaving the RAIL-CAPTURE clamped to your bed rails. The RAIL-CAPTURE only extends ½” above your bed rails and will not interfere
How many tie-downs are included with TRUCKBOSS?
TEN—four on the CAB-GUARD, four at the front of the deck and two at the rear. TBOSS-TieD tie-downs can be added anywhere you require (see ACCESSORIES page).
Will my SuperClamps (snowmobile ski tie-downs) work with TRUCKBOSS?
Yes. The TBOSS-SC-D-RING (see ACCESSORIES page) replaces the D ring included with your SuperClamp. Using Capture Channel Technology it allows SuperClamps to be used WITHOUT drilling through deck surface.
Will SuperGlide traction guide work with TRUCKBOSS?
Yes. SuperGlide is an integral part of our TBOSS-CPK (Carbide Protection Kit). TRUCKBOSS has developed an aluminum SuperGlide-HOLD-DOWN which eliminates the need to screw/rivet individual pieces of SuperGlide to the deck surface. Furthermore the HOLD-DOWN provides stability and a mounting fin for the plastic SuperGlide.
What is the best way to carry a motorcycle on a TRUCKBOSS?
Install a motorcycle wheel chock at the front of TRUCKBOSS using the Capture Channels provided. An additional set of holes may have to be drilled in your wheel chock to align with the Capture Channel. Depending on the width/weight of the motorcycle anywhere from 2 to 6 can be carried.
